Supplies

What's in build IT...

To inspire your creativity, we offer limited supplies for students to use in their projects. Many of these supplies were acquired through donations. Please keep in mind that the supplies are meant to supplement your project, not support its entire completion. You will be required to acquire additional material for your project. If you utilize too much of a specific supply, you might be asked to stop and acquire your own. 
 

3D Printing Supplies

build IT provides all filament used in their 3D printers. We utilize PLA only in the space. Because build IT supplies all PLA for everyone's projects, there is a 3-hour weekly print limit. That is, you get FREE 3D printing for up to 3 hours every week. 

Pinback Button Supplies

build IT provides supplies for everyone to make pinback buttons.

There are three sizes:

  • 25 mm / 1 in finished button with paper design of 1.4 in 
  • 32mm / 1.25 in finished button with paper design of 1.7 in
  • 58 mm / 2.25 in finished button with paper design of 2.7 in

Because supplies are limited, everyone may make up to 6 buttons a week. 

If you want to make lots of pinback buttons, we recommend purchasing your own supplies.