BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//build IT @SDSU Library - ECPv6.16.2//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:build IT @SDSU Library
X-ORIGINAL-URL:https://buildit.sdsu.edu
X-WR-CALDESC:Events for build IT @SDSU Library
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20150308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20151101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20160313T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20161106T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20170312T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20171105T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160901T120000
DTEND;TZID=America/Los_Angeles:20160901T130000
DTSTAMP:20260517T031340
CREATED:20160707T191421Z
LAST-MODIFIED:20160707T191421Z
UID:1405-1472731200-1472734800@buildit.sdsu.edu
SUMMARY:Info Session
DESCRIPTION:Learn how to get involved with the Library’s makerspace by attending an info session. Let us know you’re coming by RSVPing.  \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/info-session-2/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Info Session
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/07/infosession-01.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160902T120000
DTEND;TZID=America/Los_Angeles:20160902T130000
DTSTAMP:20260517T031340
CREATED:20160707T191843Z
LAST-MODIFIED:20160707T191843Z
UID:1406-1472817600-1472821200@buildit.sdsu.edu
SUMMARY:Info Session
DESCRIPTION:Learn how to get involved with the Library’s makerspace by attending an info session. Let us know you’re coming by RSVPing. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/info-session-3/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Info Session
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/07/infosession-01.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160907T120000
DTEND;TZID=America/Los_Angeles:20160907T123000
DTSTAMP:20260517T031340
CREATED:20160831T205557Z
LAST-MODIFIED:20160831T205557Z
UID:1452-1473249600-1473251400@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160908T123000
DTEND;TZID=America/Los_Angeles:20160908T130000
DTSTAMP:20260517T031340
CREATED:20160831T210440Z
LAST-MODIFIED:20160831T210440Z
UID:1454-1473337800-1473339600@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-2/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160914T120000
DTEND;TZID=America/Los_Angeles:20160914T123000
DTSTAMP:20260517T031340
CREATED:20160906T183133Z
LAST-MODIFIED:20160906T183133Z
UID:1458-1473854400-1473856200@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-3/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160915T123000
DTEND;TZID=America/Los_Angeles:20160915T130000
DTSTAMP:20260517T031340
CREATED:20160906T184222Z
LAST-MODIFIED:20160916T000419Z
UID:1460-1473942600-1473944400@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-4/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160920T143000
DTEND;TZID=America/Los_Angeles:20160920T163000
DTSTAMP:20260517T031340
CREATED:20160914T010603Z
LAST-MODIFIED:20160914T010645Z
UID:1480-1474381800-1474389000@buildit.sdsu.edu
SUMMARY:3D Printing & 3D Modeling Basics
DESCRIPTION:A RedID is required to attend this workshop.  \nIn this workshop\, attendees will learn the basic of 3D printing and modeling. This session will cover how you can use the Makerbot 3D printer to build your own parts. To help you learn\, there will be a hands-on session where attendees will design a custom keychain in TinkerCAD. After this workshop\, anyone who has attended build IT’s orientation will be able to use the Makerbot 3D printer during our open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/3d-printing-3d-modeling-basics/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/jpeg:https://buildit.sdsu.edu/wp-content/uploads/2016/09/20150916_094938-e1473815131669.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160921T120000
DTEND;TZID=America/Los_Angeles:20160921T123000
DTSTAMP:20260517T031340
CREATED:20160915T233112Z
LAST-MODIFIED:20160915T233112Z
UID:1545-1474459200-1474461000@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-15/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160921T140000
DTEND;TZID=America/Los_Angeles:20160921T160000
DTSTAMP:20260517T031340
CREATED:20160914T011002Z
LAST-MODIFIED:20160914T011002Z
UID:1482-1474466400-1474473600@buildit.sdsu.edu
SUMMARY:3D Printing & 3D Modeling Basics
DESCRIPTION:A RedID is required to attend this workshop.  \nIn this workshop\, attendees will learn the basic of 3D printing and modeling. This session will cover how you can use the Makerbot 3D printer to build your own parts. To help you learn\, there will be a hands-on session where attendees will design a custom keychain in TinkerCAD. After this workshop\, anyone who has attended build IT’s orientation will be able to use the Makerbot 3D printer during our open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/3d-printing-3d-modeling-basics-2/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/jpeg:https://buildit.sdsu.edu/wp-content/uploads/2016/09/20150916_094938-e1473815131669.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160922T123000
DTEND;TZID=America/Los_Angeles:20160922T130000
DTSTAMP:20260517T031340
CREATED:20160915T233654Z
LAST-MODIFIED:20160915T234403Z
UID:1546-1474547400-1474549200@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-16/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160928T120000
DTEND;TZID=America/Los_Angeles:20160928T123000
DTSTAMP:20260517T031340
CREATED:20160906T184726Z
LAST-MODIFIED:20160906T184726Z
UID:1461-1475064000-1475065800@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-5/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160928T140000
DTEND;TZID=America/Los_Angeles:20160928T153000
DTSTAMP:20260517T031340
CREATED:20160921T222654Z
LAST-MODIFIED:20160921T222654Z
UID:1579-1475071200-1475076600@buildit.sdsu.edu
SUMMARY:3D Printing & 3D Modeling Basics
DESCRIPTION:A RedID is required to attend this workshop. \nIn this workshop\, attendees will learn the basic of 3D printing and modeling. This session will cover how you can use the Makerbot 3D printer to build your own parts. To help you learn\, there will be a hands-on session where attendees will design a custom keychain in TinkerCAD. After this workshop\, anyone who has attended build IT’s orientation will be able to use the Makerbot 3D printer during our open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/3d-printing-3d-modeling-basics-3/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/jpeg:https://buildit.sdsu.edu/wp-content/uploads/2016/09/20150916_094938-e1473815131669.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160929T123000
DTEND;TZID=America/Los_Angeles:20160929T130000
DTSTAMP:20260517T031340
CREATED:20160906T185043Z
LAST-MODIFIED:20160906T185043Z
UID:1462-1475152200-1475154000@buildit.sdsu.edu
SUMMARY:build IT Orientation
DESCRIPTION:A RedID is required for this orientation workshop. \nThis orientation is required for anyone wanting to access build IT. It will provide a general introduction to the space\, best practices and for its use\, and importantly\, an introduction to potential hazards\, protective equipment\, and other aspects of safe Makerspace use. \nAfter this orientation\, attendees will be given card access to use build IT during open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/build-it-orientation-6/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://buildit.sdsu.edu/wp-content/uploads/2016/08/orientation-image.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20160929T140000
DTEND;TZID=America/Los_Angeles:20160929T153000
DTSTAMP:20260517T031340
CREATED:20160921T223152Z
LAST-MODIFIED:20160921T223152Z
UID:1581-1475157600-1475163000@buildit.sdsu.edu
SUMMARY:3D Printing & 3D Modeling Basics
DESCRIPTION:A RedID is required to attend this workshop. \nIn this workshop\, attendees will learn the basic of 3D printing and modeling. This session will cover how you can use the Makerbot 3D printer to build your own parts. To help you learn\, there will be a hands-on session where attendees will design a custom keychain in TinkerCAD. After this workshop\, anyone who has attended build IT’s orientation will be able to use the Makerbot 3D printer during our open hours. \n \nPowered by Eventbrite
URL:https://buildit.sdsu.edu/event/3d-printing-3d-modeling-basics-4/
LOCATION:build IT @SDSU Library\, 5500 Campanile Dr\, San Diego\, CA\, 92182-8050\, United States
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/jpeg:https://buildit.sdsu.edu/wp-content/uploads/2016/09/20150916_094938-e1473815131669.jpg
END:VEVENT
END:VCALENDAR